Industry News
SHENGLIN Industrial Screw Chillers, Built for Continuous Duty
Date:2026-11-09 Built for plating, chemical and low temperature process duties, SHENGLIN screw chillers combine a world brand semi hermetic twin screw compressor with high efficiency shell and tube heat exchangers. The hermetic design removes shaft seal leakage as a failure point, while the fourth generation rotor profile and integrally cast motor compression chamber deliver high efficiency at low noise over long operating hours.Key Specifications
- Refrigerant: R22 / R407C / R134A / R410A
- Power supply: 380V/3P/50Hz
- Allowable voltage fluctuate: ±5%
- Allowable frequency fluctuate: ±2%
- Max water pressure drop: 1.0 MPa
- Capacity control: four stage or automatic 0–100% regulation

Heat Exchange Performance
The evaporator and condenser use an advanced tube bundle with nucleate boiling enhancement and strengthened internal flow disturbance, delaying water side scaling. This unique design improves heat transfer efficiency by 30% compared with earlier generations. Inner grooved evaporator tubes with outer concave teeth and inner grooved condenser cutter teeth raise evaporation temperature and the unit's overall energy efficiency ratio.Protection and Monitoring
A full protection suite guards high and low pressure, discharge temperature, oil level, water flow, reverse and phase loss, chilled water freeze up and cooling water overheat. The Chinese English PLC with sealed LCD touch panel runs automatic control, displays real time operating status and interlocks with chilled water pumps, cooling pumps and cooling tower fans. The wider chilled water temperature range supports low temperature industrial setpoints.Configurable to the Duty
Options include brine evaporators, stepless energy regulation, full or partial heat recovery, pump and cooling tower control, special power supplies, remote communication and variable frequency drive.Primary Application
In plating and electroplating lines, the chiller stabilizes bath temperature to improve coating density and surface finish, shorten plating cycles and raise production efficiency and final quality.For specifications or project inquiries, please feel free to contact SHENGLIN.
+Newsmore
- 01 Feb,2024Dry Cooler D4-8x910 In Stock Is On Sale! Discount!
- 06 Sep,2023Pad Adiabatic Dry Cooler Trial Operation Before Shipment
- 06 Sep,2023828kW Adiabatic Cooling System Dry Cooler Loading
- 17 Aug,2022Flat Type Dry Cooler Finished For Canada Client
- 06 Sep,20231061kW dry cooler loading for USA client
- 31 Mar,2021Peru client Install Shenglin Adiabatic Dry Cooler At Site


